sprinter99
New Member
- Joined
- Oct 29, 2020
- Messages
- 18
Hi folks,
I am getting ready to start wiring my system and I just want to double check if I am doing it right. If you have any advice or warning please let me know. I am still a rookie in this solar world !
4 LG Bi-facial panels wired in 2S2P. ( Voc (V): 49.8 , Isc (A): 13.29, Vmpp (V): 41.6, Impp (A): 12.51 )
2 branch connectors mc4 to wire in 2s2p
90ft of mc4 connectors wires ( 8awg) running to the house.
On/Off DC switch just before the charge controller just in case I need to work on panels.
Victron 150/60 Charge controller
4awg wire running to battery bank fused with 60a Cicruit Breaker
Battery Bank
8 12v 140ah AGM wired to make a 24v battery bank. (is the correct language 2s4p or 4s2p ?)
4awg wire used to interconnect battery bank
opposite sides +/- 2awg wire runs to MSH4024M Magna sine 4000w inverter. + wire fused by a 200a circuit breaker ( is it enough or should I do 300a? )
10/2 wires running from Inverter to 120v Main house Panel. ( no 240v used)
I am a little overwelmed by the project and any information or confirmation will help alot ! thank you
Mario
I am getting ready to start wiring my system and I just want to double check if I am doing it right. If you have any advice or warning please let me know. I am still a rookie in this solar world !
4 LG Bi-facial panels wired in 2S2P. ( Voc (V): 49.8 , Isc (A): 13.29, Vmpp (V): 41.6, Impp (A): 12.51 )
2 branch connectors mc4 to wire in 2s2p
90ft of mc4 connectors wires ( 8awg) running to the house.
On/Off DC switch just before the charge controller just in case I need to work on panels.
Victron 150/60 Charge controller
4awg wire running to battery bank fused with 60a Cicruit Breaker
Battery Bank
8 12v 140ah AGM wired to make a 24v battery bank. (is the correct language 2s4p or 4s2p ?)
4awg wire used to interconnect battery bank
opposite sides +/- 2awg wire runs to MSH4024M Magna sine 4000w inverter. + wire fused by a 200a circuit breaker ( is it enough or should I do 300a? )
10/2 wires running from Inverter to 120v Main house Panel. ( no 240v used)
I am a little overwelmed by the project and any information or confirmation will help alot ! thank you
Mario