lsneon
New Member
- Joined
- Sep 8, 2022
- Messages
- 8
After my initial watching of Will's video, I sketched up 28 - 350W panels in 4 circuits of 7. From there, it was my intention to go to a combiner box then route the power into the building via #2 copper. Once inside I would split the load to each EG4 inverter by buss bar. After several re watches, it appears Will forgoes the combiner and routes the PV circuits straight to the inverters. It also appears he has 4 circuits. So now I'm thinking 2 combiner boxes each with 2 circuits of 7. From there pickup with the #2 copper to each inverter or should I ditch the combiner and just route the PV's to each EG4? Distance from combiner to inverter - 20ft. Suggestions?