FreshRust
New Member
- Joined
- Jul 29, 2022
- Messages
- 6
Hello all,
I'm looking for some feed back on a system I'd like to put together to run a few circuits in our house using an Ecoflow Delta Pro and some solar. The base load will be around 200 watts 24 hours a day with jumps probably around 800 - 900 watts for 15 minutes a few times a day. I'm not hard set on anything listed below but I did pick the Ecoflow Delta Pro since its inverter can put out 3600 watts on its 30 amp socket. I'd also to stick with a precanned system for insurance reasons and the relative ease of portability plus the warranty.
Below are the parts I've spec'd out so far.
SolarEver 455W 3x
EcoFlow Delta Pro
ECO-WORTHY stands 3x
Reliance Controls 30 Amp 250-volt 7500 transfer box
WindyNation 10Gauge 30ft 1x
WindyNation 10Gauge 3ft 2x
BoughRV Y Branch 3 to 1 1x
Solar Odyssey 4Pack 20Amp fuse holder
I've had to redo the previous home owners wiring over the years so I'm pretty comfortable doing the work. Though I do plan to higher an electrician to wire the transfer switch into the breaker panel after I do the rough in. What item I'm not clear on is what's the best solution to get the pv cables into the house from the outside. Perhaps my google foo is weak but I'm having a hard time finding a good prebuilt pv cable junction box.
Proposed layout
SOLAR
[PANEL 1]--[FUSE]--\
[PANEL 2]--[FUSE]---[Y BRANCH] --[PV JUNCTION BOX][HOUSE WALL]--[PV CABLE]--[ECO FLOW]--[10AMP CABLE]--[TRANSFER SWITCH]--[10AM CABLE]--[BREAKER]
[PANEL 3]--[FUSE]--/
Power draw devices
1 refrigerator
General network equipment
1 All in one desktop, only on when in use
Ceiling LED lighting, only on when in use
Pellet stove, only on in the winter when it's below 18f.
I'm looking for some feed back on a system I'd like to put together to run a few circuits in our house using an Ecoflow Delta Pro and some solar. The base load will be around 200 watts 24 hours a day with jumps probably around 800 - 900 watts for 15 minutes a few times a day. I'm not hard set on anything listed below but I did pick the Ecoflow Delta Pro since its inverter can put out 3600 watts on its 30 amp socket. I'd also to stick with a precanned system for insurance reasons and the relative ease of portability plus the warranty.
Below are the parts I've spec'd out so far.
SolarEver 455W 3x
EcoFlow Delta Pro
ECO-WORTHY stands 3x
Reliance Controls 30 Amp 250-volt 7500 transfer box
WindyNation 10Gauge 30ft 1x
WindyNation 10Gauge 3ft 2x
BoughRV Y Branch 3 to 1 1x
Solar Odyssey 4Pack 20Amp fuse holder
I've had to redo the previous home owners wiring over the years so I'm pretty comfortable doing the work. Though I do plan to higher an electrician to wire the transfer switch into the breaker panel after I do the rough in. What item I'm not clear on is what's the best solution to get the pv cables into the house from the outside. Perhaps my google foo is weak but I'm having a hard time finding a good prebuilt pv cable junction box.
Proposed layout
SOLAR
[PANEL 1]--[FUSE]--\
[PANEL 2]--[FUSE]---[Y BRANCH] --[PV JUNCTION BOX][HOUSE WALL]--[PV CABLE]--[ECO FLOW]--[10AMP CABLE]--[TRANSFER SWITCH]--[10AM CABLE]--[BREAKER]
[PANEL 3]--[FUSE]--/
Power draw devices
1 refrigerator
General network equipment
1 All in one desktop, only on when in use
Ceiling LED lighting, only on when in use
Pellet stove, only on in the winter when it's below 18f.