I would like to find a 16S Smart BMS that will control an external solenoid or contactor to isolate the pack, rather than a circuit board mounted FET or contactor.
I was running a Zeva BMS in my cart which is using an Gigavac contactor to isolate the pack. I would like to continue to use this type of a setup rather than the typical BMS FET control.
Any help would be appreciated.
I was running a Zeva BMS in my cart which is using an Gigavac contactor to isolate the pack. I would like to continue to use this type of a setup rather than the typical BMS FET control.
Any help would be appreciated.