RUiXU Sol-ark configuration

[Systems Planet]

I dont understand the RUiXU dip switches.
I have a rack of 6 batteries but the switches have no place to set the Can id.

How do you specify the master battery?
How do you specify each Can bus ID?

I need protocol ID 2, which is dip switch 6.
Do I set switch 6 on every battery?

 

[Systems Planet]

Can anyone validate my solark settings for connecting to 6 100Ah RUiXUs?

 

[Rachel Wang-RUIXU]

Pls check attached.
And also you can find the info in this link:

RUiXU 48V 5120Wh Server Rack Battery /Sol-ark Inverter Communication - RUiXU lifepo4 battery USA

Connect Communication Cable • Communication Cable Use a standard RJ45/ T568B color code/ CAT5e Ethernet Cable(The maximum length is not more than 10 meters) • Connect Connect the master battery C-up port to the BMS communication port on the inverter. . Bat

www.ruixubattery.com

 

[Systems Planet]

Can Bus ID
Your diagram indicates every slave should have the same switch setting.
So how does the solark address a battery? IE How does its Can ID get set?
Doesn't each battery need a unique ID?

Sol-ark settings
Can you check my solark settings in the three images above?

 

[Sherwin]

Can Bus ID
Your diagram indicates every slave should have the same switch setting.
So how does the solark address a battery? IE How does its Can ID get set?
Doesn't each battery need a unique ID?

Sol-ark settings
Can you check my solark settings in the three images above?

The battery will automatically encode the ID, starting from the master, the master ID is 0, and then add up the encoding from the adjacent slave. You can refer to PACK NO in picture DIP setting.jpg. Part. This is the ID number of the battery. The DIP switch is used to select the communication protocol, not to encode the battery ID.


There is no problem with the inverter parameter setting

 

[Systems Planet]

There is no problem with the inverter parameter setting

Thank you for your prompt reply.

Everything is working now.
On the top battery I set switch 6 on.
Every other switch is off on every battery.

I had to start each battery, one at a time, delaying 10 seconds between each start. Otherwise I was getting multiple Masters.

I love your server rack.

I wish I had visibility into the battery cells.
Are there any tools I can use to view the individual charge states?