Hi all,
I currently have three Hanwha Q peak 350 watt panels connected in series with a second set connected in series both then connected in parallel. My charge controller is a Victron SmartSolar 150/45tr. It is not working as I thought it should. My thought is that I have to many panels, total wattage of 2160, for the Charge controller. If I remove one panel from each string I would be more within the spec's. Could this be the cause of my problems. It does not go into charge mode.
Mike
I currently have three Hanwha Q peak 350 watt panels connected in series with a second set connected in series both then connected in parallel. My charge controller is a Victron SmartSolar 150/45tr. It is not working as I thought it should. My thought is that I have to many panels, total wattage of 2160, for the Charge controller. If I remove one panel from each string I would be more within the spec's. Could this be the cause of my problems. It does not go into charge mode.
Mike