bjfields
New Member
- Joined
- Oct 4, 2019
- Messages
- 38
I set my TracerAN to float at 13.8v, but I'm only measuring 13.5 volts at the battery terminals. Should I be concerned about this?
3 x 100watt panels, EPEver 3210AN, 100AH LiFePO4 from AimsCorp.
BTW, not meaning to hijack my own thread but...
I just received a second battery and will run parallel. Is it advisable to re-cable so that the positive lead comes off one battery and the negative off the other?
3 x 100watt panels, EPEver 3210AN, 100AH LiFePO4 from AimsCorp.
BTW, not meaning to hijack my own thread but...
I just received a second battery and will run parallel. Is it advisable to re-cable so that the positive lead comes off one battery and the negative off the other?