What type of fitting do I use with PVC and a outdoor disconnect?

[Travis55]

I'm using the IMO disconnect by Signature Solar, it looks like it's hard plastic and has some knockouts already there. I'm wondering what fitting I use to connect the PVC conduit to the disconnect.



I've only worked with EMT and liquid tight, so not sure on PVC, I assume some sort of gasketed set screw or something? Any links for reference would be appreciated.

 

[BentleyJ]

VOLT® 24" Length 3/4 Inch PVC Conduit for Transformers

24" of 3/4 inch PVC conduit Male terminal adapter Ring clamp

www.voltlighting.com

https://www.supplyhouse.com/DiversiTech-6-1-3-4-Slip-PVC-A-C-Condensate-Drain-Pan-Fitting?utm_source=google_ad&utm_medium=Shopping_tm&utm_campaign=Shopping_TM_New_users&gad_source=1&gclid=CjwKCAjwm_SzBhAsEiwAXE2CvyWlDAHTWCHtC_5i8jkzD12V8keVeGDCa0MWXJV06xRMF7mIxReZPxoCmd8QAvD_BwE

https://www.supplyhouse.com/Carlon-E943E-3-4-PVC-Schedule-40-Male-Adapter?utm_source=google_ad&utm_medium=shopping_neutral&utm_campaign=Shopping_Neutral_New_users&gad_source=1&gclid=CjwKCAjwm_SzBhAsEiwAXE2Cv4JOu3GFuv5mNE01uavaPjHRAGUqN8ulXCmQm8uodH0ygc1Pw42FrBoCztcQAvD_BwE

 

[Travis55]

VOLT® 24" Length 3/4 Inch PVC Conduit for Transformers

24" of 3/4 inch PVC conduit Male terminal adapter Ring clamp

www.voltlighting.com

https://www.supplyhouse.com/DiversiTech-6-1-3-4-Slip-PVC-A-C-Condensate-Drain-Pan-Fitting?utm_source=google_ad&utm_medium=Shopping_tm&utm_campaign=Shopping_TM_New_users&gad_source=1&gclid=CjwKCAjwm_SzBhAsEiwAXE2CvyWlDAHTWCHtC_5i8jkzD12V8keVeGDCa0MWXJV06xRMF7mIxReZPxoCmd8QAvD_BwE

https://www.supplyhouse.com/Carlon-E943E-3-4-PVC-Schedule-40-Male-Adapter?utm_source=google_ad&utm_medium=shopping_neutral&utm_campaign=Shopping_Neutral_New_users&gad_source=1&gclid=CjwKCAjwm_SzBhAsEiwAXE2Cv4JOu3GFuv5mNE01uavaPjHRAGUqN8ulXCmQm8uodH0ygc1Pw42FrBoCztcQAvD_BwE

Thanks! Could I make my own by just combining these two from home depot?

https://www.homedepot.com/p/Carlon-3-4-in-PVC-Male-Adapter-E943E-CTN/100404042

https://www.homedepot.com/p/Halex-3-4-in-Rigid-Conduit-Locknuts-4-Pack-26197/100111071

 

[BentleyJ]

Yes, of course. I included several choices just to show the possibilities that you could use an O ring or gasket from a liquitight connector or a condensate drain adapter.