ChrisB1234
New Member
Hey all,
So I have currently the following setup.
4* 100ah lifePo batteries connected in series for 48v
A PowMr 5kw all in one controller/inverter
7* 200w 12v solar panels connected in series for max 1400w charging.
The biggest problem I have is the settings within the powmr unit, my batteries all check out ok and my solar array on a good day pushes 1360w through the breaker into the powmr unit. But even without any AC output load, it will only ever push half that amount into the batteries, and it is always exactly half of what I measure coming in
If anyone has one of these units connected to a 48v battery, please give me a list of your settings.
So I have currently the following setup.
4* 100ah lifePo batteries connected in series for 48v
A PowMr 5kw all in one controller/inverter
7* 200w 12v solar panels connected in series for max 1400w charging.
The biggest problem I have is the settings within the powmr unit, my batteries all check out ok and my solar array on a good day pushes 1360w through the breaker into the powmr unit. But even without any AC output load, it will only ever push half that amount into the batteries, and it is always exactly half of what I measure coming in
If anyone has one of these units connected to a 48v battery, please give me a list of your settings.