Hi All,
New to the Forum and All Things Solar, I've been reading and watching as much as I can
about the Bluetti AC200P and AC200P MAX, and noticed that the newer model Max had
dropped it's Solar Power requirements for the MPPT Voltage Range down to 10-145VDC from 35V-150V, If I'm understanding that correctly.
So, my question is, we are planning on having this as a Battery Backup for our Home, and after the Ice Storm Debacle In Texas
last year, we're very spooky about a repeat. As we're older and less adaptable (trying to be nice) We/ I have been looking into
a back up system to help sustain us for a while when the power starts going off and on. So, since the new 200 MAX is showing you
can use 10volts, could this be operated on less solar panels if needed instead of say 3 of the SP120 or PV120's needed for the 200P ?
Sorry if this is not put correctly and hope y'all can figure out what I'm asking ;-)
Thanks, Take Care, Be Safe,
CK
New to the Forum and All Things Solar, I've been reading and watching as much as I can
about the Bluetti AC200P and AC200P MAX, and noticed that the newer model Max had
dropped it's Solar Power requirements for the MPPT Voltage Range down to 10-145VDC from 35V-150V, If I'm understanding that correctly.
So, my question is, we are planning on having this as a Battery Backup for our Home, and after the Ice Storm Debacle In Texas
last year, we're very spooky about a repeat. As we're older and less adaptable (trying to be nice) We/ I have been looking into
a back up system to help sustain us for a while when the power starts going off and on. So, since the new 200 MAX is showing you
can use 10volts, could this be operated on less solar panels if needed instead of say 3 of the SP120 or PV120's needed for the 200P ?
Sorry if this is not put correctly and hope y'all can figure out what I'm asking ;-)
Thanks, Take Care, Be Safe,
CK