bds70
New Member
I am going to review my entire system from panels to inverters. This way I can clarify what I "think" I know and what I definitely do "not" know. I am going to take this in bite size pieces.
8 yrs ago a company built and installed a 12v system for me. At the time I knew nothing.
The panels used were 6 pairs of Winaico 260W 20v 60 cell. Each pair was wired in series. Then each pair went to 3 individual RCD"s (as shown) each positive and neg to their own switch.
Leaving the RCD the wires were grouped POS together neg together so a parallel setup. I believe this was to maximise the solar output
What is the output from that arrangement?
8 yrs ago a company built and installed a 12v system for me. At the time I knew nothing.
The panels used were 6 pairs of Winaico 260W 20v 60 cell. Each pair was wired in series. Then each pair went to 3 individual RCD"s (as shown) each positive and neg to their own switch.
Leaving the RCD the wires were grouped POS together neg together so a parallel setup. I believe this was to maximise the solar output
What is the output from that arrangement?