SunGold SPH10K48SP 10KW 48V SPLIT PHASE SOLAR INVERTER
- Thread starter HardyJ
- Start date
42OhmsPA
What's in a title?
Looks awfully familiar...
diysolarforum.com
6 MWh SRNE ASF48100U200-H 10kw.
Edit 6-26-24 6MWh Edit 5-31-24 5MWh Edit 4-12-24 4,000 kWh Edit 3-23 Current Settings. Edit 3-4-24 3MWh https://diysolarforum.com/threads/2-mwh-srne-asf48100u200-h-10kw.67809/post-1027777 Edit 1-2-24 2MWh AC output, close to 2MWh solar...
diysolarforum.com
Thank you for this Very informativeLooks awfully familiar...
6 MWh SRNE ASF48100U200-H 10kw.
Edit 6-26-24 6MWh Edit 5-31-24 5MWh Edit 4-12-24 4,000 kWh Edit 3-23 Current Settings. Edit 3-4-24 3MWh https://diysolarforum.com/threads/2-mwh-srne-asf48100u200-h-10kw.67809/post-1027777 Edit 1-2-24 2MWh AC output, close to 2MWh solar...
Lighthouse Beacon
Following the Light
Talked to SunGold today about my requirements and they recommended this unit. I was originally interested in BluePower IP6048, especially for the IP65 rating, but I am seeing some weird reviews/experiences about that unit so I am hesitant. Not a whole lot of info out there on SunGold SPH10K48SP it seems.
42OhmsPA
What's in a title?
See the SRNE link I posted above...
Lighthouse Beacon
Following the Light
Gotcha, yeah guess the PowMr you see on Amazon are also this unit. I may lean away from this unit and investigate doing (2) 6.5KW BluePower SP6548SOLAR INVERTER / CHARGER which I believe are clones of the MPP Solar LV 6548 which have been better received by the community I think
42OhmsPA
What's in a title?
Be cautious with the 6548s...it's my understanding the pre 'covid' units are quite reliable, the post with the higher max voc are a tossup.
There’s a reason some of us are trying this 10k instead of the mpps
Lighthouse Beacon
Following the Light
Thanks for your reply! Well stink.. after hearing that I don't know what to do.. What should I do? Here is my panel setup
https://diysolarforum.com/threads/string-configuration-question-%F0%9F%98%87%E2%98%80%EF%B8%8F.70569/#post-893090
Maybe I should stick with original plan and commit to SPH10K48SP
My buddy scared me away from it because I can't parallel. I guess that's what got me interested in 6548 so I could add on as my budget allowed..
Man I just don't know what to do.....
42OhmsPA how is SRNE holding up now? Still good?
Thanks for your reply!
42OhmsPA
What's in a title?
Your link is broken.
It's holding up excellent, still have 0 regrets.
Think about this you could buy 2 of the SRNEs for around the same price as the Voltronic 6548s... Split your loads panels and put an SRNE on each panel... No parallel needed.
Lighthouse Beacon
Following the Light
That’s a great, I like the idea of redundancy. Interesting
Lighthouse Beacon
Following the Light
Lighthouse Beacon
Following the Light
guys how do I make it not be mad I don’t have a battery. System complaining of no batt 
42OhmsPA
What's in a title?
Try changing to utility first priority. Iirc that's what I had to do when I first programmed my SRNE.
Lighthouse Beacon
Following the Light
I’m default on 01 for grid input priority I’m throw error 3 but I’ve got throughput now “batt disconnected”
Lighthouse Beacon
Following the Light
Showing I’ve got gel and volts but I’m no batt, no setting for no batt attached… hmm set a user defined batt of 0.0.0?42OhmsPA
What's in a title?
I think I just ignored it. That was weeks ago, can't remember ?.
The battery voltage showing is what it would be charging at. I did set battery to user.
The battery voltage showing is what it would be charging at. I did set battery to user.
Sandiegoarea
New Member
Temporary install of SPH10K48SP for testing. We have a Growatt 12kw system, but it faces issues with down time and not enough volts to use solar array properly. The best thing about the 10kw Sungold is that it amplifies the PV volts to 500V input. This has been great and was able to quickly restring our 24 panels to raise the volts. However there are some draw backs and waiting for Sungold. First the SmartEss app is not ready for prime time. The app WILL ONLY chart PV 1 input and not PV 2 input. Second it will also only chart HOT 1 or L1 and NOT HOT 2 or L2. The WiFi dongle was terrible at set up. I’m waiting for Sungold to respond if there are other options or changes that can be made so the app produces the correct data for PV KW and for Load KW.
jester74
New Member
- Joined
- Jun 13, 2022
- Messages
- 6
I’ve got a 10kw Sungold on the way. Do you know if I can use it in UPS mode while it’s plugged in to grid via main panel and using a non-neutral-switching MTS where circuits get their neutral from same main panel?
Kenny_
Solar Wizard
I have had a hellofatime trying to get wifi to work today.... my system arrived late last night...got it temporarily hooked up and in and working in place of my Ecoflow Delta Pro....been cranking away all day...working great.... with the exception of the wifi...
It seemed to work at first then when it gave me issues I tried reinstalling the app etc and the screwed everything up apparently (and I can't find any way to reset to factory) I've tried searching around the internet but no luck. I'd like to at least reset everything and start over / try again but can't even do that! Jeeeeeze!!
my thread is here: https://diysolarforum.com/threads/just-ordered-a-sungold-10kw-48v-split-phase-solar-inverter.71345/
I'll be attempting to connect the AC grid input tomorrow (for charging/backup w/o solar) and need to get my three additional panels wired up. Everything is in 'test' 'just get 'er going and make sure it all works before I do a more permanent install. Also more batteries on the way...
It seemed to work at first then when it gave me issues I tried reinstalling the app etc and the screwed everything up apparently (and I can't find any way to reset to factory) I've tried searching around the internet but no luck. I'd like to at least reset everything and start over / try again but can't even do that! Jeeeeeze!!
my thread is here: https://diysolarforum.com/threads/just-ordered-a-sungold-10kw-48v-split-phase-solar-inverter.71345/
I'll be attempting to connect the AC grid input tomorrow (for charging/backup w/o solar) and need to get my three additional panels wired up. Everything is in 'test' 'just get 'er going and make sure it all works before I do a more permanent install. Also more batteries on the way...
Lighthouse Beacon
Following the Light
I also ordered the 10KW SGP hybrid inverter. For those of you who has worked with it, I appreciate any help with the questions posted on this thread.
https://diysolarforum.com/threads/a...hybrid-inverter-with-zero-export.72059/unread
Thanks,
https://diysolarforum.com/threads/a...hybrid-inverter-with-zero-export.72059/unread
Thanks,
My 10Kw SPH10K48SP has been dead out of the box. Constant 05- alarm. Battery overcurrent hardware protection. Nothing connected except the battery. Smells a bit burnt. Sungold keeps pressuring me to take it apart and break open the sealed connections but I think that's a bit much to ask for a brand new unit. I can't get them to offer a replacement and my (new) unit is dead on arrival. Not a good experience so far.
Similar threads
