spearomax
New Member
I'm building an off grid system in a camper based around Victron multiplus 24v. I've got 16 identical cells from Docan and 2 JK bms. Is it okay to do the following? I feel that would be a much cleaner and simpler install than the below which is based off of @Steve_S post #6 from this thread.
These are not complete diagrams, they are simply the battery connection to the lynx which will distribute power/charging elsewhere. I decided on 2 batteries for redundancy and the possibility that I won't need both. I think my power consumption may be low enough to switch to just one battery and use 8 of the cells for another project. Also everything in the camper can be run on 24v which is nice and convenient.
Thanks for any input.
These are not complete diagrams, they are simply the battery connection to the lynx which will distribute power/charging elsewhere. I decided on 2 batteries for redundancy and the possibility that I won't need both. I think my power consumption may be low enough to switch to just one battery and use 8 of the cells for another project. Also everything in the camper can be run on 24v which is nice and convenient.
Thanks for any input.