Mickie
New Member
- Joined
- Feb 24, 2022
- Messages
- 213
What was ur SOC at the time of testing?I did. I'm currently running it on a 24v system (despite it being a 48v balancer). It works like they said it would in that you can connect up as many of the four pairs of wires as you want and it will work for 24v, 36v or 48v systems.
It seems to read the battery voltages accurately, or it at least matches what the internal BMS says the voltage is. Unfortunately, my batteries (being lifepo4) weren't far enough apart in voltage / soc at the moment to be able to measure any significant amperage across the lines from the balancer. By the time I had received the package today, the batteries were within .1 volt of each other. I'll keep an eye on it and update if I can actually see it doing anything significant, more than the .1 to .3 amps I saw today.
Were uou charging and or pulling any loads?
If u were charging or pulling a load and ur below 13.7 it will show balanced if its anything like mine even if they are at different SOC but once u go over 13.8v u well start to see delta go up. Even at rest over 13.7