Sunsetsolar
New Member
- Joined
- Apr 16, 2022
- Messages
- 19
I have a kit from Seplos and they sent me the battery config its suppose to be 4s2p but if I load the batteries as in step six then place the bus-bars as in step seven I think I will have a big bang! And in step seven I see that the serial bar codes do not line up as the way the step six shows the batteries installed..
Can anyone take a look before I smoke this..
I called the vendor for tech support but No reply so I thought I might pass it by you guys...
This is a first time post so if its in the wrong format or location let me know and delete it and i'll try to set it up right..
Thanks!
Can anyone take a look before I smoke this..
I called the vendor for tech support but No reply so I thought I might pass it by you guys...
This is a first time post so if its in the wrong format or location let me know and delete it and i'll try to set it up right..
Thanks!