TennesseeSolar
New Member
- Joined
- Jan 21, 2021
- Messages
- 12
I now have all the major parts for my solar system and have started to assemble them. Parts are (4) 345 W panels in parallel, 60 Amp Mppt charge controller, 5.2kW 24V Tesla Battery, and 3000W 24 V inverter. Below is a picture of my 4 solar panels already mounted on a frame. I will be putting all my electronics in an outdoor enclosure which will have powered fans for air circulation. What I am not clear on though is the wire size I should use for all these components and the breaker or fuse sizes I should use. I thought about using breakers so I can turn the individual pieces off if needed for service. The one I am most concerned about is the 60 amp breaker from the batter to inverter. Looking on here this might be too small or might even need to be changed to a class T fuse?? Can you please look at this diagram and see what I might be doing wrong. Also attached are the specs. I found online for a Tesla model S battery that I am using if that helps.