fopoku2k2
New Member
- Joined
- Aug 20, 2020
- Messages
- 88
So I read that the inverter and BMS voltage settings are supposed to be different. I need helping confirming if my settings are right since I have been getting voltage spikes in the morning after the sun has charged the battery bank for a few hours. I am using the following:
INVERTER SETTINGS
- 16x 3.2v 280Ah CATL Cells
- 48v 200A Smart Daly BMS and
- Growatt SPF 5000 ES
INVERTER SETTINGS
- Bulk Charging = 55.0v
- Float = 54.0v
- Low DC cut-off = 46.0v
- Volt High Protect = 59.0v
- Voltage Low Protect = 48.0v
- Balance Open Start Voltage = 3.28v