LightOnTheRoad
New Member
- Joined
- Oct 8, 2020
- Messages
- 4
Soo, first time posting here, also first time building my own mobile, floating system. I have encountered the following problem: some of my lights/LED strips do not work.
If I plug them straight into MPPT solar charger, they work. So the wires, connections and 'bulbs' are all fine.
If I try running them through my either switch panels, they do not work.
However, running the ceiling lights through either the switch panels work fine.
They all run through the same negative bus bar.
Let me know if any more information is needed.
Please help, I don't know what else to try!
If I plug them straight into MPPT solar charger, they work. So the wires, connections and 'bulbs' are all fine.
If I try running them through my either switch panels, they do not work.
However, running the ceiling lights through either the switch panels work fine.
They all run through the same negative bus bar.
Let me know if any more information is needed.
Please help, I don't know what else to try!