learnbydoing
New Member
let me start at the beginning:
the set i have so far has been running about 6 months.
1. 4 Renogy 200 watt panels set up in series and parallel for 24 volt
2. epever tracer 4210AN controller w/
remote meter MT50
3. 2 12v 100ah ampere batteries
in series for 24v
4. pure sine wave inverter
PS-3000KAR
5. getting ready to add 2 more batteries
the only things i am running on it is a fridge that uses about 60 w most of the time but goes occasionally to 100.
And a heating matt that uses 30w to cure our sweet potatoes.
Problems with this system. every time the batteries are charged the inverter and the remote buzz and the charge shuts off until it has run down enough. a couple of days ago i opened the fridge and it was warm. i hadn't been in it for 24 hours so not sure when the ac shut off. never happened before. the weather had bee rainy and overcast very little sunshine. the battery had shown 25.4 the night before so i thought it should have been enough.
Any ideas where we are going wrong?
Let me know what other info you need.
Thank you so much for being here to help.
the set i have so far has been running about 6 months.
1. 4 Renogy 200 watt panels set up in series and parallel for 24 volt
2. epever tracer 4210AN controller w/
remote meter MT50
3. 2 12v 100ah ampere batteries
in series for 24v
4. pure sine wave inverter
PS-3000KAR
5. getting ready to add 2 more batteries
the only things i am running on it is a fridge that uses about 60 w most of the time but goes occasionally to 100.
And a heating matt that uses 30w to cure our sweet potatoes.
Problems with this system. every time the batteries are charged the inverter and the remote buzz and the charge shuts off until it has run down enough. a couple of days ago i opened the fridge and it was warm. i hadn't been in it for 24 hours so not sure when the ac shut off. never happened before. the weather had bee rainy and overcast very little sunshine. the battery had shown 25.4 the night before so i thought it should have been enough.
Any ideas where we are going wrong?
Let me know what other info you need.
Thank you so much for being here to help.