amartin
New Member
- Joined
- Feb 8, 2022
- Messages
- 32
Hello, I'm still a newbie and drinking from the firehose. I'm also now on a timecrunch for the start of my project and since I can no longer procrastinate it's time to dive in head first. General idea is a 12v LFP house battery inside the truck cab + Victron Orion-Tr to charge at 30A + Victron Smart Shunt to watch my loads (and for the future). LFP battery will likely be an SOK 100Ah for now only because I'm out of time - not terrible but not what I wanted, future plans will be something different.
Looking to get a sanity check on my wiring plan so I don't have a bad bad day. Also so I don't burn down my truck. Made a quick wiring diagram below - does this look correct? I may have missed adding some fuses/breakers on the 12v ports/loads and will probably add those in the actual build.
Thanks for any help to point me in the right direction!
Update 10/29/22: I built it and it works!! Skip to post #20 to read more. Thanks everyone for the help!
Looking to get a sanity check on my wiring plan so I don't have a bad bad day. Also so I don't burn down my truck. Made a quick wiring diagram below - does this look correct? I may have missed adding some fuses/breakers on the 12v ports/loads and will probably add those in the actual build.
Thanks for any help to point me in the right direction!
Update 10/29/22: I built it and it works!! Skip to post #20 to read more. Thanks everyone for the help!
Last edited: