Hi everyone. I've recently started planning a new build that's much more complicated than my last van and could use some input from people smarter than I am.
Mainly, I'm curious if my wire gauges are appropriate and my fuses are correctly placed and sized. I've tried to do my best to use the online calculators and amp charts, but I'm sure there's some nuances to electrical systems that I'm not familiar with.
Also, if there are any other quality-of-life design considerations that I'm not thinking of.
I apologize my diagram isn't the most detailed, I'm used to drawing network diagrams, not electrical diagrams.
A few details that may/may not be helpful:
- Solar panels: 2x 200W 12V Rich Solar
- SCC: Victron100/30 MPPT
- Batteries: 2x 206Ah 12V SOK
- Inverter: Giandel 2200W
- Transfer Switch: Go Power! TS-30 30A
- AC Charger: EG4 12V 15A
- DC Loads: Puck lights, Maxxair fan, 12v ICECO fridge, mobile device chargers, Water pump
- AC Loads: Induction cooker or electric kettle (not simultaneous), laptop charger, maybe a TV.
Thank you so much. Your input is greatly appreciated.
Mainly, I'm curious if my wire gauges are appropriate and my fuses are correctly placed and sized. I've tried to do my best to use the online calculators and amp charts, but I'm sure there's some nuances to electrical systems that I'm not familiar with.
Also, if there are any other quality-of-life design considerations that I'm not thinking of.
I apologize my diagram isn't the most detailed, I'm used to drawing network diagrams, not electrical diagrams.
A few details that may/may not be helpful:
- Solar panels: 2x 200W 12V Rich Solar
- SCC: Victron100/30 MPPT
- Batteries: 2x 206Ah 12V SOK
- Inverter: Giandel 2200W
- Transfer Switch: Go Power! TS-30 30A
- AC Charger: EG4 12V 15A
- DC Loads: Puck lights, Maxxair fan, 12v ICECO fridge, mobile device chargers, Water pump
- AC Loads: Induction cooker or electric kettle (not simultaneous), laptop charger, maybe a TV.
Thank you so much. Your input is greatly appreciated.