frostyllama
New Member
- Joined
- Sep 15, 2020
- Messages
- 27
I've got 2 100a 24v 8s Overkill Solar BMS'. Looking at wire current ratings, it doesn't look like the 10 gauge stock wires are going to cut it.
It seems that 6 AWG wire would leave a good safety margin at 100 amps continuous, problem is, I'm not sure they will fit the 4 solder points. is 8 AWG good enough?
Curious how others have tackled this problem
It seems that 6 AWG wire would leave a good safety margin at 100 amps continuous, problem is, I'm not sure they will fit the 4 solder points. is 8 AWG good enough?
Curious how others have tackled this problem