Hello guys,
my challenge: I would like to remotelly deactivate BMS in my caravan. The termination of power cable is not the preferred solution, therefore I am looking for a logical one. Thus the idea on balance cable came to my mind. Did some one treid out to terminate one of the B1-4 or GND line in the 5 Pin of 4S BMS cable ?
I know Daly is quite picky on this cable therefore need some advice if there are some no-gos . Logically in case B1-4 can be disconnected the BMS should shutdown due to low voltage issue on the sense line.
hope the case is clear and there is some experience on that
thx, Daniel
my challenge: I would like to remotelly deactivate BMS in my caravan. The termination of power cable is not the preferred solution, therefore I am looking for a logical one. Thus the idea on balance cable came to my mind. Did some one treid out to terminate one of the B1-4 or GND line in the 5 Pin of 4S BMS cable ?
I know Daly is quite picky on this cable therefore need some advice if there are some no-gos . Logically in case B1-4 can be disconnected the BMS should shutdown due to low voltage issue on the sense line.
hope the case is clear and there is some experience on that
thx, Daniel