Robert Vinson
New Member
- Joined
- Sep 28, 2022
- Messages
- 28
I just installed 2 racks of EG4 batteries and 2 15k inverters. I have good voltage (52.6v- about 30% SOC) on the batteries at each inverter. As soon as I shut the input breaker to either inverter, all of the batteries go into protection. They will sit there and then reset, and then do it again. Any ideas on what could be causing this? I have a EG4 chargeverter getting here tomorrow. I was hoping that putting it on charge would fix but wondering if I am missing something glaring?