Sjr
New Member
I have just replaced my older EG4 6500’s for two new shiny EG4 6000XP’s.
So many improvements from its predecessor, alas one inverter has been doggy from the start. I get numerous errors that seemed to be resolved by the doing the turn off and on thing . Errors range from 4 , 19, 29, . I began to think there maybe a problem with this inverter, error 29 refers to sync trigger signal lost in parallel , Error 19 refers to Bus voltage to high, my solar panels are no where near the 480 VDC max range .But turning the inverter off. Stop that error completely.
Then a different error will at first show as an unhappy smiley face then disappear. And then show a red light and a fault with no error code at all.
I have had this running for a month, but the. I have started getting these random errors, that one would think that’s not good , and then they disappear .
The other inverter is perfect .
After my last experience I had hoped for a smoother install testing period .
Anyway if anybody else has experienced these issues let me know.
So many improvements from its predecessor, alas one inverter has been doggy from the start. I get numerous errors that seemed to be resolved by the doing the turn off and on thing . Errors range from 4 , 19, 29, . I began to think there maybe a problem with this inverter, error 29 refers to sync trigger signal lost in parallel , Error 19 refers to Bus voltage to high, my solar panels are no where near the 480 VDC max range .But turning the inverter off. Stop that error completely.
Then a different error will at first show as an unhappy smiley face then disappear. And then show a red light and a fault with no error code at all.
I have had this running for a month, but the. I have started getting these random errors, that one would think that’s not good , and then they disappear .
The other inverter is perfect .
After my last experience I had hoped for a smoother install testing period .
Anyway if anybody else has experienced these issues let me know.