Trying to pay AliExpress, but CAN'T!!!

[BiduleOhm]

Mine were 3.33x too, nothing wrong with that

 

[TheGriz]

Thank Steve who posted right above your post. He has worked with Amy and got a lot of this stuff in place. The name cards was one of his ideas, IIRC. As for your voltages, they're a little higher than some of ours were. Mine were in the 3.29xxV range.

ETA: there are a couple of big long threads on this whole subject. These will keep you busy reading for a while.....
https://diysolarforum.com/threads/j...-usd-delivered-grade-a-to-canada.3387/page-23

https://diysolarforum.com/threads/x...cells-purchase-review.3850/page-14#post-53827

Thanks for your feedback. So is the voltage being higher not a good thing? If so, what is the consequence?

 

[TheGriz]

Thank Steve who posted right above your post. He has worked with Amy and got a lot of this stuff in place. The name cards was one of his ideas, IIRC. As for your voltages, they're a little higher than some of ours were. Mine were in the 3.29xxV range.

ETA: there are a couple of big long threads on this whole subject. These will keep you busy reading for a while.....
https://diysolarforum.com/threads/j...-usd-delivered-grade-a-to-canada.3387/page-23

https://diysolarforum.com/threads/x...cells-purchase-review.3850/page-14#post-53827

Thanks Steve for "paving the road"!

 

[TheGriz]

Mine were 3.33x too, nothing wrong with that

What about the one cell being 3.34x?

 

[Sgt Raven]

Mine were 3.33x too, nothing wrong with that

Doesn't that put them a little above the 40-60% ideal long term storage range? But as long as they haven't been sitting there for a long time........
In a 4S that's 13.32V.....

 

[Sgt Raven]

What about the one cell being 3.34x?

3.65V is the max charge for these cells. It's only a problem if they have been stored a long time and I think these are moving out pretty fast.

 

[BiduleOhm]

What about the one cell being 3.34x?

Don't worry about it, it's not even a 10 mV difference when you take into account the next digit, you're fine

Doesn't that put them a little above the 40-60% ideal long term storage range? But as long as they haven't been sitting there for a long time........
In a 4S that's 13.32V.....

Well, as long as they're not near 100 % or less than 20-30 % I'm ok with it.

 

[Sgt Raven]

What about the one cell being 3.34x?

There are a bunch of threads on here and some of the posters are electrical engineers who do this stuff as their day jobs, too.
There is a wealth of information in this forum. It just takes a bit to wade through it.

 

[Steve_S]

WOW...I am floored by the exceptional customer service so for from Xuba. I asked just a couple ours ago if my cell had shipped. Amy promptly responded and stated that "your order was sent out yesterday" with a few pictures of my four cells...get this with a tag that had my name hand written on it! And as an additional bonus, she sent me a 26 second video showing me the voltage of each cell. I am impressed!!!!

Now the 64,000 dollar question. Here are the voltages of each cell. Being a noob here, is this good or otherwise???
- 3.3426
- 3.3334
- 3.3353
- 3.3352

Anxiously waiting your feedback,
Mike

Nothing wrong with those numbers at all. Now comes the hardest part... waiting...

 

[TheGriz]

I asked Amy to toss in the Buss Bars and Bolts. Her response, "I already put them in the box"!!!! Again thanks Steve_S for paving the road!

Hats off to Xuba and Amy!