Hey all. I’ve just discovered this forum and there are some brilliant people and solutions on here, so I’m hoping someone can help me… my solar installer was useless and didn’t really know what he was doing, so I’m learning all this as I try and figure out the system!
My first question/problem is “why is my battery power getting sent back to the grid, as well as powering the house” (I’d rather keep it all for the house)?
From the image below you can see (at least I think that’s what it’s showing) that 85W of power are being pulled from the battery by the inverter (there is no solar at nearly 10pm at night, so 0W from that), of which 64W are powering the house, but 63W are being sent to the grid?
If it helps, the bits that will probably be relevant to this question are:
Thank you!
My first question/problem is “why is my battery power getting sent back to the grid, as well as powering the house” (I’d rather keep it all for the house)?
From the image below you can see (at least I think that’s what it’s showing) that 85W of power are being pulled from the battery by the inverter (there is no solar at nearly 10pm at night, so 0W from that), of which 64W are powering the house, but 63W are being sent to the grid?
If it helps, the bits that will probably be relevant to this question are:
- SolaX X3-Hybrid-G4 (10 kW) inverter
- 4 x SolaX batteries (1 x SolaX MC0600 HV10230 V2 (3.1kWh) and 3 x SolaX HV10230 V2 (3.1kWh) = total 12.4kWh
- 3-phase power to the house
- I have a MyEnergi Eddi also
Thank you!