Skysthelimit
New Member
Greetings fellow DIY'ers:
My off-grid house is about 75% completed so it's about time for me to do my part, erect the solar array, wire everything up, and run the wires in the conduit to the power/fuse box. The only problem is, I really don't know the right way to do it. I don't know what gauge wire to use, if I need a fuse, or any of that stuff. The components I purchased are 32 370 watt panels, 2 Growatt 5k inverters, an auto transformer, and 6 GYLL 48 vdc 100 ah batteries. Does anyone recommend I add anything else to the build? I'm not sure what gauge wire I'll need to run from the array, which is ~50' from the large cement box I bought and installed in the ground for all the electrical components. From there, the output will go some 64' to the fuse panel in the garage. Are there any known schematics I can refer to? I welcome all constructive criticism and comments. Thanks all.
My off-grid house is about 75% completed so it's about time for me to do my part, erect the solar array, wire everything up, and run the wires in the conduit to the power/fuse box. The only problem is, I really don't know the right way to do it. I don't know what gauge wire to use, if I need a fuse, or any of that stuff. The components I purchased are 32 370 watt panels, 2 Growatt 5k inverters, an auto transformer, and 6 GYLL 48 vdc 100 ah batteries. Does anyone recommend I add anything else to the build? I'm not sure what gauge wire I'll need to run from the array, which is ~50' from the large cement box I bought and installed in the ground for all the electrical components. From there, the output will go some 64' to the fuse panel in the garage. Are there any known schematics I can refer to? I welcome all constructive criticism and comments. Thanks all.