Guys I need your help please!
Want to install a BMS on my powerwall that is composed off 49 Leaf Gen 1 cells, I have arranged in parallel packs of 7, (8v), then all in series to give me approx 58v. I run this via a MPP Solar 5048MGX, with custom battery settings and no BMS, (I can hear the cries of ‘no’), but over the past 12 months I have had no balance issue in general use that have bothered my. But have decided that I should think again. Hence I stumbled upon the Seplos BMS as a potential solution and have spent the last several hours going through every post on this thread. Mostly it scares me as in my simple mind it was fairly plug and play.
Can anyone advise me to go ahead, bearing in mind I am not clever like you guys obviously are, and I can forsee myself getting bogged down in sorting out details that you all seem to thrive on.
I have a simple question therefore. If I purchase a Seplos 14s, can I actually hook it up between my pack and my MPP MGX, via the CANBUS, having selected ‘Pylontech’ in the MGX software config manual and have any chance of it actually working straight out of the box? Please advise. Thanks in advance, Brian (UK)