Mark, I appreciate you jumping in and trying to help.
I believe so. I actually believe I received the files from you a while ago and the Schneider correctly connects to the (3) EG4 packs and reads 300Ah under the Insight Home. See screenshots from the QT-BMS-Test program regarding the firmware:
View attachment 170695
Insight Home
Unintentionally yes. The instructions I had received from SS was to drain batteries to about ~20% to 30% then recharge them. The issue is that once they read 40% SOC they suddenly drop to 0% SOC shutting down my system. This has happened 3x already. I have not been able to get batteries to 20% SOC to start charging them.
I tried to get from SS the Schneider AGS setpoints to start the generator automatically at correct SOC and/or Voltages but I have not been able to get these settings from them.
What I need, from either you or SS:
1. Schneider 4048SW Charger Settings for topping off these batteries correctly
2. Schneider AGS Settings for turning on/off the generator for charging purposes
Please let me know your thoughts