Hello! Got the 18k powered on today and have been playing with some settings. I'm coming from a pair of 6500EXs as I'm sure at least a few here have. I don't have an interconnect agreement (planning on tackling this over the summer) so at this point looking to see if I can replicate the standard 6500EX flow:
- Run in Off-Grid Mode from batteries until they reach a specified SOC
- At that specified SOC (usually sometime at night) switch to grid to power the loads
- When solar charges the batteries to a certain SOC the next day switch back to Off-Grid Mode
Right now I'm currently in Off-Grid Mode and batteries are happily powering the loads. From what I understand I can set the Off-Grid Cut-Off SOC(%) in the Discharge Setting which will switch back over to grid to power the loads (#2 above). The question I have is how (or if?) I can configure it to switch BACK to Off-Grid Mode at a specified SOC?
Something like off grid until 30% SOC, then switch to grid, then switch BACK to off grid at 50% SOC.
I skimmed the newest manual I could find and tried to make sense out of the options in the menus on the screen and the website but am coming up empty. I'm assuming it uses a different set of values? Appreciate if someone could point me in the right direction. Apologize if I missed this somewhere, it's been a week! Thanks in advance!