nofear72784
New Member
- Joined
- Jul 15, 2022
- Messages
- 181
Just finished installing an SP6548 with 2 48v packs I built from eve 280k cells and 6kw of panels. Having a bit of a problem and hope someone can point me in the right direction. Upon firing everything up I noticed that any fixtures with a dimmable LED flicker. We have dimmable LED cans in our kitchen, family room and some ceiling fans. All wiring sizes are correct and I checked my wiring multiple times. So far I tried:
adding more load to the system up to 2kw
isolating the load so only the breaker for the lights was on
turning off the panels
turned off the AC input to the unit
disconnecting the batteries and running off of just solar
All the above still resulted in flickering. I can get the flicker to go away by putting it in bypass mode or running the same sub panel off the generator so it's not the panel wiring. I see threads here and there talking about flickering but no real solution. Hard to watch TV or cook when your lights want to put on a strobe show. Everything else works just fine. Ideas? Thanks in advance!
adding more load to the system up to 2kw
isolating the load so only the breaker for the lights was on
turning off the panels
turned off the AC input to the unit
disconnecting the batteries and running off of just solar
All the above still resulted in flickering. I can get the flicker to go away by putting it in bypass mode or running the same sub panel off the generator so it's not the panel wiring. I see threads here and there talking about flickering but no real solution. Hard to watch TV or cook when your lights want to put on a strobe show. Everything else works just fine. Ideas? Thanks in advance!