Springton
Solar Enthusiast
Thanks for responding MP.Dad's EG4 8k setup is on fw v22 which seems to be working fairly well now. No apparent issues with the 6x EG4 LifePower4 battery comms on our end (RS485 direct to 8k inverter... Haven't update battery fw yet).
See 2 posts above for our setup.
How are your batteries and inverter addressed?
Mine are:
Inverter = id 1
EGLP4 batteries:
batt 1 =id 0 is connected to the inverter
batt 2 =id 4
batt 3 = id 5
batt 4 = id 6
batt 5 = id 7
batt 6 is an EG$LL ver2 and its comm is not connected.
Used to use the CAN protocol to the LL battery, but found wildly different SOC numbers on the other dissimilar batteries, so changed to RS485 and found strikingly similar SOC's.