I am in the process of wiring a AGS module to a Generac 5000e diesel generator. I THINK i have identified the START/STOP/COMMON wires from the switch BUT i want to make sure and also have a few questions. Hopefully someone with far more knowledge and experience than I can help!
I have included the wiring diagrams for each. The first pic is the Generac switch wiring diagram. This is what I think, PLEASE correct me if I'm wrong! On the switch, Terminal 6 is START, Terminal 3 is RUN. I THINK Terminal 5 is STOP...I am not sure at all and I need help with identifying for sure. I THINK the Gray wire coming from Terminal 85 in the start relay going to the oil pressure switch is COMMON. Again, I am not sure and would like help to identify.
The second pic is the wiring diagram for the AGS module. It requires wiring START/STOP/ COM and that brings the system down to NO/COM which the Cerbo can trigger.
One question i have: On the Generac switch, do i need to splice Terminal 6 and 3 together and wire into the START Terminal of the AGS? I dont understand how the module will keep the generator running if there is no contact.
Any advice appreciated.
I have included the wiring diagrams for each. The first pic is the Generac switch wiring diagram. This is what I think, PLEASE correct me if I'm wrong! On the switch, Terminal 6 is START, Terminal 3 is RUN. I THINK Terminal 5 is STOP...I am not sure at all and I need help with identifying for sure. I THINK the Gray wire coming from Terminal 85 in the start relay going to the oil pressure switch is COMMON. Again, I am not sure and would like help to identify.
The second pic is the wiring diagram for the AGS module. It requires wiring START/STOP/ COM and that brings the system down to NO/COM which the Cerbo can trigger.
One question i have: On the Generac switch, do i need to splice Terminal 6 and 3 together and wire into the START Terminal of the AGS? I dont understand how the module will keep the generator running if there is no contact.
Any advice appreciated.