treeder
New Member
- Joined
- Oct 14, 2022
- Messages
- 46
I got some help from Markus, he has different settings he can change that I don't see on my EG4 monitoring interface, one of those being "Start PV Volt(V)". Mine was set to 140 and he changed it to 280. The sun is about to go down so we'll see if the sunset trips my power and after sunrise tomorrow I'll report back.
I'm not sure if it was 140 prior to the 1717 firmware or why that upgrade started this problem though.
I'm not sure if it was 140 prior to the 1717 firmware or why that upgrade started this problem though.