Finding specifics on BMS settings.

[SailCS33]

Good day to everyone. I purchased lifepo4 batteries from OYE with these specs related to voltage and temps:

Nominal voltage:3.2V
Charge Voltage:3.65V
End-of-Discharge Voltage:2.5V
Charging Temperature：-5~60°C
Discharging Temperature：-30~60°C

Looking at DALY BMS I am struggling to find any information that would tell me which model is suitable for my batteries. Any feedback is much appreciated.

Thanks

 

[drwormy]

I would get a Smart BMS and be able to program those settings as you see fit. OR tell eg. Daly to setup those settings at the factory.

 

[HRTKD]

Purchase a BMS based on it fitting your max amp charge/discharge, battery voltage and number of cells. Most BMS are configurable as far as high/low charge values. The OverkillSolar BMS that I'm using is quite configurable and has low temperature cut off.

 

[SailCS33]

Thank you all! I went with DALY SMART BMS.

 

[snoobler]

I need to add that even though the cells say they can be charged to -5°C. Do not charge below 0°C.

 

[SailCS33]

I need to add that even though the cells say they can be charged to -5°C. Do not charge below 0°C.

Thanks. This is going to be on a sailboat so I never anticipate these temps