Bluedog225
Texas
- Joined
- Nov 18, 2019
- Messages
- 3,217
There is some deal with little fittings costing a fortune. Home Depot is charging about a buck a washer. It’s weird.
What I need are a bunch of Z shaped fittings. Like the Renogy brackets ($3 each).
The uni and super strut versions are more $ (see below).
I need around 250 of these things and I’m thinking there is a better way or cheaper source.
The best I can think of is aluminum z-bar. A lot of work but much cheaper.
Strangely, I get a ton of hits from the UK and Australia when I search for z-fittings. But very little in the US.
Any ideas for getting big bags of 100 hot dipped Z brackets (2 or 3 hole) for cheap? I feel like my google fu sucks.
Thanks!
What I need are a bunch of Z shaped fittings. Like the Renogy brackets ($3 each).
The uni and super strut versions are more $ (see below).
I need around 250 of these things and I’m thinking there is a better way or cheaper source.
The best I can think of is aluminum z-bar. A lot of work but much cheaper.
Strangely, I get a ton of hits from the UK and Australia when I search for z-fittings. But very little in the US.
Any ideas for getting big bags of 100 hot dipped Z brackets (2 or 3 hole) for cheap? I feel like my google fu sucks.
Thanks!