onemorebattery
Git'r done!
- Joined
- Feb 1, 2020
- Messages
- 110
@onemorebattery - I believe the TE Contactor that you identified is also used by the REC bms system, a quality product.
Do you have yours setup as a common port, single contactor today?
Btw - nice setup, seems like a winner. Wouldn’t mind a picture to get an idea on you enclosure if your using one.
Thanks
My setup is common charge/discharge and the module is wired logical AND to work with a single contactor. If either IN1 or IN2 goes low the contactor opens.
My relay module is just hanging unmounted right now. I mount lots of stuff on a control panel, which is a too fancy way of saying that I did this:
I bought these clipboards (way cheaper than buying same sized poly sheets) and standoffs.
Amazon.com : Officemate OIC Recycled Landscape Plastic Clipboard, Black (83050) : Office Products
Amazon.com : Officemate OIC Recycled Landscape Plastic Clipboard, Black (83050) : Office Products
www.amazon.com
LuckIn 8-Pack Sign Standoff Screws 1/2 x 4 inch, Acrylic Standoff Mounting Hardware, Stainless Steel Standoffs for Glass Panel, Plexiglass Picture: Amazon.com: Industrial & Scientific
LuckIn 8-Pack Sign Standoff Screws 1/2 x 4 inch, Acrylic Standoff Mounting Hardware, Stainless Steel Standoffs for Glass Panel, Plexiglass Picture: Amazon.com: Industrial & Scientific
www.amazon.com
I drilled off the clips (very soft rivets) and use the boards with the standoffs to cover my busses/wires and to mount my switches and instrument displays, mostly an assortment of cheap DROK stuff.