Steve_S
Offgrid Cabineer, N.E. Ontario, Canada
The Single Terminals are plated copper, M8 Bolt, dimensions are 35mm X 35mm, cover dimensions are 108mm X 90mm.
Luyuan battery case
- Thread starter dddem
- Start date
ArthurEld
Solar Wizard
I don't really care whether I have single or double terminals but since you are verifying that the single are copper, I am ordering singles from now on. I suspect the double terminals are brass.
I think to make the box work with my 230Ah cells would mostly just be a case of filling the extra space with something and using the right bus bars. Shouldn't be too difficult to make happen, even if I have to do it myself.
Still debating whether to change to a JK BMS or just stick with my JBD contactor BMSes. They're way overkill being rated at 300A, but I have them already. Probably fine to stick with, be cheaper, but...
Still debating whether to change to a JK BMS or just stick with my JBD contactor BMSes. They're way overkill being rated at 300A, but I have them already. Probably fine to stick with, be cheaper, but...
ArthurEld
Solar Wizard
I think your plan to fill in the space will work. I added 2 small extra spacers to mine. And you will be fine without the display if you stick with the JBD.
Steve_S
Offgrid Cabineer, N.E. Ontario, Canada
If they are not Pure Copper they are good Orange Brass at least, Now I am checking the resistance through the terminal, which is 0.38 mOhm.
Brass is extremely recycled, every recycle makes it lighter/whiter, the more orange it is the more copper within it. Pure Clean Brass is fine but recycled brass increases in resistance. With the JK's at least you can calibrate what the Actual Real Voltage is at the Terminals.
Brass is extremely recycled, every recycle makes it lighter/whiter, the more orange it is the more copper within it. Pure Clean Brass is fine but recycled brass increases in resistance. With the JK's at least you can calibrate what the Actual Real Voltage is at the Terminals.
ArthurEld
Solar Wizard
I caught Amy in time to use the single terminals on my front panel.
Can someone please tell me if these battery boxes should each be grounded?
Also, I am stacking mine on top of each other. Do I need to put something between them to keep the boxes from touching each other?
Can someone please tell me if these battery boxes should each be grounded?
Also, I am stacking mine on top of each other. Do I need to put something between them to keep the boxes from touching each other?
ScrotpusGobbleBottom
Corn Pop was a bad dude.
Not insulated on top. If you threw one off a building it would short.
I'd like to see you carry it to the roof of a building to throw it!
S Davis
Solar Addict
- Joined
- Sep 25, 2021
- Messages
- 809
Mine came with a small ground screw on the front panel, down low right side. If stacking I would use some type of rubber between four corners(horse stall mat should work) to keep them from sliding around. I just had her add heat function to the BMS for my mobile packs.
Last edited:
SoggyShoes
Solar Enthusiast
They are from Amy. I said I wanted the new batteries with the pressed copper flexible bus bar connectors like some one on the DIY solar forum recently ordered and she knew exactly what I was talking about. She even sent me this image in the chat to make sure. As for the of the terminal holes for the single vs the double, you should ask her. I do know they had to custom cut the holes for my cases.
Zwy
Emperor Of Solar
Ground the case only. I'd daisy chain from the ground hole on the front cover to the next box. Should not matter if they touch.
solitarysecluded
New Member
- Joined
- Oct 3, 2022
- Messages
- 50
VS View attachment 212903Does anyone get the wide version box? I've noticed many of you use this newer version, narrow front-more depth?
Seems similar setup internally. I think the wider version has more room in front panel for T-Class holder etc and save bit space for racking?
Just wondering reasoning between the two, might consider for my next purchase..
SoggyShoes
Solar Enthusiast
Whoo Hoo!!!
Amy is sending my order out! I am so excited.
@solitarysecluded my guess is that Amy can customize quite a bit. If you have a specific width you need, you should ask her.
I am attaching the image Amy sent me of my cases before she boxed them up. Here is the data sheet she sent me of my Eve 304A cells. I added some measures of center because I was using it to show someone the basics of Google Sheets.
Amy is sending my order out! I am so excited.
@solitarysecluded my guess is that Amy can customize quite a bit. If you have a specific width you need, you should ask her.
I am attaching the image Amy sent me of my cases before she boxed them up. Here is the data sheet she sent me of my Eve 304A cells. I added some measures of center because I was using it to show someone the basics of Google Sheets.
ArthurEld
Solar Wizard
Zwy
Emperor Of Solar
To system grounding. Doesn't need to be inverter, it can be a grounding bus bar or direct to grounding electrode.
S Davis
Solar Addict
- Joined
- Sep 25, 2021
- Messages
- 809
Mine are taking longer as I customized four of the boxes to twin 304 12volt batteries with cutouts for two BMS screens, breakers, switches and mounting for two BMS.
SoggyShoes
Solar Enthusiast
My order is ready but it is a holiday in China so the shipping company is closed until Monday.
S Davis
Solar Addict
- Joined
- Sep 25, 2021
- Messages
- 809
I have about half my stuff so plenty to work on.My order is ready but it is a holiday in China so the shipping company is closed until Monday.
SoggyShoes
Solar Enthusiast
Jealous!
ArthurEld
Solar Wizard
Battery #2. Class T attached to inner compression panel.
ArthurEld
Solar Wizard
I am happy with the footprint of these new batteries.
Stacking 5 cases will take less than 1/4 of the space compared cells on shelves.
Stacking 5 cases will take less than 1/4 of the space compared cells on shelves.
The boxes come with fr4 sheets
Similar threads
