RTL44
New Member
- Joined
- May 30, 2022
- Messages
- 67
I know (now) that diagonal wiring w/busbars is preferred - especially for large battery racks - but I didn't realize it until AFTER I wired everything. I have 2 banks of four 100A 48V server rack batteries. I wired it with the lead coming from the CENTER of the bus bar (for both - and +) instead.
How important is it that I have it wired diagonally? (diagram & pix below) The yellow circles are where the leads from the batteries are connected to the bus bar, the line is where the lead to the Sol-Ark is connected to the bus bar - basically in the center. It's the same for all 4 bus bars.
Thanks in advance
How important is it that I have it wired diagonally? (diagram & pix below) The yellow circles are where the leads from the batteries are connected to the bus bar, the line is where the lead to the Sol-Ark is connected to the bus bar - basically in the center. It's the same for all 4 bus bars.
Thanks in advance