PjD
New Member
Hi, newbie here, been lurking a while though…
I have a EG4 6000EX-48HV (latest firmware installed today) hooked up to two EG4 LL version 2 batteries and four Renogy RND-100D solar panels wired in series.
I use a Chargeverter to keep batteries charged also, I don’t turn it on unless they get down low.
Everything is working good and sounds right with no PV input, it hardly makes any noise.
When I turn on the PV the inverter gets considerably louder and humming, is this normal? Power input and output seems fine, no errors or beeping.
What are your thoughts?
Pictures attached for reference.
Thank you for your input.
I have a EG4 6000EX-48HV (latest firmware installed today) hooked up to two EG4 LL version 2 batteries and four Renogy RND-100D solar panels wired in series.
I use a Chargeverter to keep batteries charged also, I don’t turn it on unless they get down low.
Everything is working good and sounds right with no PV input, it hardly makes any noise.
When I turn on the PV the inverter gets considerably louder and humming, is this normal? Power input and output seems fine, no errors or beeping.
What are your thoughts?
Pictures attached for reference.
Thank you for your input.