1) I just received my 24 volt 200 amp battery yesterday. Came in good shape. Thank you to sig solar for that. I hooked it up to the Growatt 3000 24 volt which I bought from sig thru AMAZON as far as I understand and charged the battery. Worked great. Then after unplugging the Growatt from utility power to test the Growatt ran for about 5 hours. Great. The then the Growatt shut off with the battery still showing 3 led lights of charge. I was only running a few lights, a refer and lcd tv. I reset the Growatt and it started and shut off again in under a minute. Is there a log I can read in the Growatt or someone I can send the Growatt settings to to figure out why?
2) Also I connected the Growatt to the battery using the correct ports and Ethernet cable l. But can’t find anywhere in documentation about what that Does and how it should be set up.
3) I received with my battery a USB stick with a green connector on the end meant for two wires. No idea what that is for.
Thank you for helping me out.
Mark Weiss
435-363-6363
Logan Utah
Dadweiss@mac.com
2) Also I connected the Growatt to the battery using the correct ports and Ethernet cable l. But can’t find anywhere in documentation about what that Does and how it should be set up.
3) I received with my battery a USB stick with a green connector on the end meant for two wires. No idea what that is for.
Thank you for helping me out.
Mark Weiss
435-363-6363
Logan Utah
Dadweiss@mac.com