There is no reset hole anywhere on it?This damn wifi not working is making me crazy though.![]()
![]()
Can't even reset the dang thing and start over.
There is no reset hole anywhere on it?This damn wifi not working is making me crazy though.![]()
![]()
Can't even reset the dang thing and start over.
Yep....gonna clean thing up a bit tonight/tomorrow. Thanks!I’ve had a hammer crimps work fine for years. Can pull 100a no problem with heat or connection. Definitely get some heat shrink on those.
Yep it will show all of the useful info from anywhere in the world since the pi solar assistant is running on handles the network connection and does it a heck of allot easier than the wifi stuff in the inverter does.I love all the info on the display.....but I want that via Wifi...
will solar assist do that?
I'll check it out once I do some tidying up here and verifying that all is working as expected (still need to connect to the Grid for charging/backup/feed-through and make sure that is all working as expected).Yep it will show all of the useful info from anywhere in the world since the pi solar assistant is running on handles the network connection and does it a heck of allot easier than the wifi stuff in the inverter does.
I paid no attention to what came "in" as far as l1 and l2 on mine.Another question.... do I need to be concerned about the AC input phases vs AC output phases are are they totally isolated?
i.e. does L1 of the AC Grid Input have to be the 'same' as the L1 AC Inverter Output and L2-L2 or is that irrelevant?
I'm a wee bit nervous to connect up the grid AC 220 Input..
BRAVOOOOOOOO!!!!!Whew!!! All working so far.... plugged the 10K in in place of the Delta Pro.
YES!!![]()
Wow they sent you square screened oneSo here's what the test setup/trial system looks like at the moment.
Next step is to connect to the grid for backup/charging if/as needed.
View attachment 175442
Solar Assistant will work. Just plug the USB Type B printer cable to the Orange Pi Solar Assistant Device and select the SRNE selection in Solar Assistant setup wizard. The onboard wifi and app are garbage. Not planning to use it.I know.... Supposedly it has 'protection' and a 5 year warranty, but .... I sent them a message...we'll see. otherwise that's a $600 mistake...
also
downloaded the 'test' programs for seeing if Solar Assist would work and can't get anything out of Watchpower...maybe I'm just dense or am missing something ... either it can't connect to my inverter or I've got to set something up in the program that I'm missing....manual is very confusing at least for me....maybe I need the simple idiot guide to testing/checking or something![]()
Yeah, I was surprised after seeing yours. It does match what was on line when I ordered.Wow they sent you square screened one
oops forgot to post that...but .... I have connected (plugged in - to the clothes dryer plug) the 240 v grid power input to the inverter.....no sparks or magic smoke released yet...