Sgt Raven
Solar Addict
- Joined
- Feb 17, 2020
- Messages
- 1,079
IIRC, a SB-50 is 6AWG or smaller. The same as my PP-75s. You have to step up to the next size larger for heavier cables. For 4AWG I'm using PP-120s.I thought I read somewhere Amy didn't want to pack the cells in the box. I could be wrong. But if they sold it everything prebuilt, like a drop in battery, that would be different. Personally I wouldn't want that and I am only interested in the box.
As far as the cable assembly I agree with you. Everyone has different needs. I would prefer posts but I would be ok with the Anderson connectors and I would need to know the wire size and the capacity of the connectors and if they are authentic. I would also need to know more about the meter. Are they using a hall sensor or a shunt? Don't know. I don't think a bluetooth signal would pass through metal very well but there might be a work around for it. And everything will be a tight fit. Will a BMS fit in there? Lots to consider but the box is a step in the right direction and I still like it.
If I get serious enough I will contact Amy and see what the shipping cost is and get into the details with her.